Product Description: UL KG 9500 is a low-odor, two-component aliphatic polyurea coating designed for flooring applications on properly prepared substrates. It is a 100% solids, zero VOC product with excellent color, gloss retention, and UV stability. It is environmentally friendly and available in clear, pre-pigmented sets, and custom colors.
Application Equipment: Applied using squeegees, rollers (phenolic with 3/8″ nap), and natural fiber brushes. Clean tools with Xylene, MEK, or Acetone.
Ratio: 1:1 by volume
Gel Time: 20 minutes (pot life); 25 minutes work time on floor
Basic Physical Properties:
Adhesion: 535 psi (ASTM D4541)
Elongation: 60% (ASTM D412)
Flexibility: Pass, No cracking (1/8″ mandrel) (ASTM D522)
Gloss Retention: 81+ (ASTM D523)
Hardness: 46 ± 2 Shore D (ASTM D2240)
Impact Resistance: 32 in-lbs (ASTM D2794)
QUV Topcoat: Delta E <2.0 @ 1,700 hrs (ASTM G154)
Taber Abrasion: 30.5 mg loss (ASTM D4060)
Tensile Strength: 1,287 ± 200 psi (ASTM D412)
Safe Walking Surfaces: Pass (ASTM F1637.95)
Surface Resistivity: >1.0 x 10¹⁶ Ω/sq (ASTM D257)
Volume Resistivity: 1.4 x 10¹⁴ Ω-cm (ASTM D257)
Water Vapor Transmission: 0.223 grains/ft²/hr (ASTM E96)
Key Certifications: Complies with FDA and USDA Coating Regulations for Incidental Food Contact Applications (Keller and Heckman LLP Letter of Opinion).
Recommended Applications: Suitable for garage floors, light commercial flooring, porches, and custom decorative floors using color chips. Can include optional additives for slip resistance or matte finish.
Packaging:
- 2-gallon set: 1 gallon Part-A and 1 gallon Part-B
- Custom colors and pigment additives available
